101
Commissioning
Matching the coding addresses to the system version
In code 2, set the following coding addresses:
Code 2 see page 141.
"00" System design
"01" Single or multi−boiler system
"02" Burner type
"03" Oil or gas operation
"07" Boiler number (only for multi−boiler systems)
"0C" Return temperature raising
"0d" ThermControl regulates ...
"4C" Function plug sÖ
"4d" Function plug sL
"4E" Function plug gS
"77" LON user number
"79" Fault manager
"98 Viessmann system number
"9C" Monitoring LON users
Note
The control unit must be matched to the system equipment.
See codes 1 and 2 from page 139.
5862730GB
To Next Page
Loading...
Need help?
General
