To Next Page

To Previous Page

1. Information Disposal of packaging ............................................................................ 4

Symbols ................................................................................................. 4

Intended use .......................................................................................... 4

Product information ................................................................................ 5

■

Vitocell 100-B and Vitocell 100-W, type CVBA ............................... 5

2. Installation information Preparing for installation ........................................................................ 6

■

Connections with Vitosolic 100 ........................................................... 6

■

Connections with electronics module SDIO/SM1A ............................. 7

■

Before installation ............................................................................... 7

3. Installation sequence Siting the DHW cylinder ......................................................................... 9

■

Siting a DHW cylinder with an immersion heater EHE ....................... 9

Installing the immersion heater EHE (if available) ................................. 9

Testing the anode connection ................................................................ 10

Fitting the cover ..................................................................................... 10

Fitting the solar expansion vessel .......................................................... 11

■

Fitting the expansion vessel to the DHW cylinder .............................. 11

■

Wall mounting ..................................................................................... 14

Installing the cylinder temperature sensors ........................................... 14

Connecting the solar control unit ........................................................... 15

Connecting the immersion heater EHE ................................................. 16

Connecting the heating water side and solar side ................................. 16

■

System scheme with solar collectors and boiler ................................. 16

Connections on the DHW side ............................................................... 18

■

Safety valve ........................................................................................ 19

Installing the high limit safety cut-out (STB) .......................................... 20

■

Electrical connections ......................................................................... 20

■

Setting the response temperature ...................................................... 21

■

Resetting the high limit safety cut-out (STB) ...................................... 21

Connecting the equipotential bonding ................................................... 21

Commissioning ...................................................................................... 21

4. Specification ................................................................................................................ 22

Index

5838641

Brand	Viessmann
Model	VITOCELL 100-W
Category	Boiler
Language	English

Viessmann VITOCELL 100-W Installation Instructions

Table of Contents

Other manuals for Viessmann VITOCELL 100-W

Questions and Answers:

Viessmann VITOCELL 100-W Specifications

Related product manuals