EasyManuals Logo

Viessmann VITOCELL 100-W Installation Instructions

Viessmann VITOCELL 100-W
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Incorrect usage or operation of the appliance (e.g. the
appliance being opened by the system user) is prohibi-
ted and results in an exclusion of liability.
Incorrect usage also occurs if the components in the
system are modified from their intended use (e.g.
through direct DHW heating in the collector).
Adhere to statutory regulations, especially concerning
the hygiene of potable water.
Product information
Vitocell 100-B and Vitocell 100-W, type CVBA
Enamelled DHW cylinder with internal indirect coil for
DHW heating in conjunction with solar thermal sys-
tems, as well as floorstanding and wall mounted boil-
ers in dual mode operation.
DHW cylinder fully equipped with the following:
Solar-Divicon
Vitosolic 100, type SD1 or electronics module
SDIO/SM1A
Capacity: 250 l and 300 l
Suitable for systems conforming to DIN 1988,
EN 12828 and DIN 4753
DIN registration number: 0266/07-13MC/E
Vitocell 100-B: Finished in silver
Vitocell 100-W: Finished in white
Intended use (cont.)
5838641

Other manuals for Viessmann VITOCELL 100-W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Viessmann VITOCELL 100-W and is the answer not in the manual?

Viessmann VITOCELL 100-W Specifications

General IconGeneral
BrandViessmann
ModelVITOCELL 100-W
CategoryBoiler
LanguageEnglish

Related product manuals