5840 711 - 01
6
Vitoconnect OPTO2 Installation and Operating
Product Information
Vitoconnect is a wall-mounted Internet interface that
communicates with the boiler control unit of the heat
generator.
Using an Optolink interface, the Vitoconnect
type OPTO2 can be used for single-boiler systems
without any downstream heating circuits.
The Vitoconnect enables remote operation of heating
systems over the Internet. For settings and queries the
ViCare app is used. A qualified contractor can
alternatively control the heating system via Vitoguide.
Data Connections with Vitoconnect, Type OPTO2
Legend
A Heat generator with control unit
B Optolink connecting cable
C Vitoconnect, type OPTO2
D Wi-Fi signal
E Wi-Fi router (provided by the user)
F Secure Internet connection to the Viessmann server
G Viessmann Server
H Mobile network
or
Wi-Fi connection
I Smartphone
In conjunction with heat generators with Optolink interface only
Operation using the ViCare app
With the ViCare app you can operate the heating system
remotely over the Internet.
For further information go to www.vicare.info or the
App Store or Google Play Store.
Preparing for Installation
Heat generator
Wall mounted or storage
combi boilers
Floor standing boilers Solid fuel boilers
Supported control units
Vitotronic 200, type
HO1
HO1A
HO1B
Vitotronic 200, type
KW2
KW6B
Vitotronic 300, type
KW3
Vitoligno 300-C with Ecotronic and software version 2.12
To Next Page
Loading...
Need help?
General
