ViewSonic CD4620 35
Appendix: Installing and removing stands
How to install stands
1. Please turn monitor off.
2. After inserting stand in guide block, fasten Thumbscrews on both sides of the monitor.
NOTE:
Install the stands so that their longer portions come to the front.
How to remove the stands
1. Spread the protective sheet on the fl at surface, such as a desk.
2. Place monitor on the protective sheet.
3. Remove screws with a screwdriver and place them in a safe place for reuse.
* Stand is not supply. (Stand sold as an option accessory)
Screws
Longer portion comes to
the front.
Stands
Downloaded From TV-Manual.com Manuals
To Next Page
Loading...
