ViewSonic CDE4803-H User Manual

4
2. Parts and Functions
2.1. Control Panel
1 2 3 4 5 6 7 8
9
MUTE INPUT
MENU
1
[ ] button
Use this button to turn the display on or put the
display to standby.
2
[MUTE] button
Switch the audio mute ON/OFF.
3
[INPUT] button
Choose the input source.
• Used as [OK] button in the On-Screen-Display
menu.
4
[ ] button
Move the highlight bar up / Increase the adjustment
while OSD menu is on, or increase the audio output
level while OSD menu is off.
5
[ ] button
Move the highlight bar down / Decrease the
adjustment while OSD menu is on, or decrease the
audio output level while OSD menu is off.
6
[ ] button
Move the highlight bar up to adjust the selected
item while OSD menu is on.
7
[ ] button
Move the highlight bar down to adjust the selected
item while OSD menu is on.
8
[MENU] button
Return to previous menu while OSD menu is on, or
to activate the OSD menu when OSD menu is off.
9
Remote control sensor and power status
indicator
• Receives command signals from the remote
control.
• Indicates the operating status of the display:
- Lights green when the display is turned on
- Lights red when the display is turned off
- Lights Amber when the display is in standby
mode

ViewSonic CDE4803-H Specifications

General

Pixel pitch	- mm
Response time	8 ms
Display diagonal	48 \
Display brightness	350 cd/m²
Display technology	LED
Native aspect ratio	16:9
Contrast ratio (typical)	4000:1
Display number of colors	-
Supported graphics resolutions	1920 x 1080 (HD 1080)
DVI port	No
Ethernet LAN	Yes
VGA (D-Sub) input ports	1
Product color	Black
Product design	Digital signage flat panel
Panel mounting interface	200 x 200, 400 x 400 mm
RMS rated power	10 W
Power consumption (standby)	- W

Weight and Dimensions

Depth	59.9 mm
Width	1081.8 mm
Height	623.4 mm
Weight	25400 g