ViewSonic M1+ - Power on by Power Bank Function; Using the Battery; Battery Usage Time Information

1515
Power on by Power Bank Funcon
The projector can also be powered by a power bank.
1
2
15V/3A
To power your projector:
1. Connect one end of the USB Type-C cable to the USB-C port of the projector.
2. Connect the other end of the USB Type-C cable to the power bank.
NOTE: The power bank should be 45W (15V/3A) at least, and support Power
Delivery (PD) protocol output. Addionally, at 15V/3A the projector can
be powered on and charge simultaneously.
Using the Baery
The baery level icon will show at the top right of the Home Screen. As the
baery’s power level runs low, the screen will show a “low baery message”.
Baery Usage Time Informaon
Charging
About 4.5 hours
Usage Hours
up to 6 hours (Baery Saving)
up to 4 hours (Extended Eco)
up to 3 hours (Eco)
up to 2.5 hours (Full)
Baery Level Indicator (Charging)
During Charging: Flashing White LED light
Full Charge: Solid White LED light