ViewSonic M1+ - Shutting down the Projector

2929
Shung Down the Projector
1. Press and hold the Power buon for three (3) seconds on the projector, or press
the Power buon on the remote control.
2. Pressing the Power buon on the remote control will result in the following
message:
3. Press the Up/Down buons on the remote control to select Turn O and press
OK on the remote control.
NOTE: When not in use, please press the Power buon to power o. If only
using the Power buon on the remote control to power o, the projector
will enter standby mode and the embedded baery will sll consume
some power.