ViewSonic M1+ User Manual

3
Safety Precautions
Please read the following Safety Precauons before you start using the projector.
• Keep this user guide in a safe place for later reference.
• Read all warnings and follow all instrucons.
• Allow at least 20“ (50 cm) clearance around the projector to ensure proper
venlaon.
• Place the projector in a well-venlated area. Do not place anything on the
projector that prevents heat dissipaon.
• Do not place the projector on an uneven or unstable surface. The projector may
fall over, causing personal injury or projector malfuncon.
• Do not use if the projector is lted at an angle of more than 10° degrees le or
right, nor at an angle of more than 15° degrees forwards or backwards.
• Do not look straight at the projector lens during operaon. The intense light
beam may damage your eyes.
• Always open the lens shuer or remove the lens cap when the projector lamp is
on.
• Do not block the projecon lens with any objects when the projector is under
operaon as this could cause objects to become heated and deformed or even
cause a re.
• The lamp becomes extremely hot during operaon. Allow the projector to
cool for approximately 45 minutes prior to removing the lamp assembly for
replacement.
• Do not use lamps beyond the rated lamp life. Excessive use of lamps beyond the
rated life could cause them to break on rare occasions.
• Never replace the lamp assembly or any electronic component unless the
projector is unplugged.
• Do not aempt to disassemble the projector. There are dangerous high voltages
inside which may cause death if you should come into contact with live parts.
• When moving the projector, be careful not to drop or bump the projector on
anything.
• Do not place any heavy objects on the projector or connecon cables.
• Do not stand the projector on end vercally. Doing so may cause the projector to
fall over, causing personal injury or projector malfuncon.
• Avoid exposing the projector to direct sunlight or other sources of sustained
heat. Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices (including ampliers) that may increase the temperature
of the projector to dangerous levels.

ViewSonic M1+ Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:9
Projection distance	1 - 1 m
Vertical scan range	23 - 120 Hz
Horizontal scan range	15 - 135 kHz
Projection technology	DLP
Contrast ratio (typical)	120000:1
Screen size compatibility	24 - 100 \
Projector native resolution	WVGA (854x480)
Keystone correction, vertical	-40 - 40 °
Lamp power	10 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	30000 h
Focus	-
Throw ratio	1.2
Focal length range	- mm
Supported graphics resolutions	640 x 480 (VGA), 1920 x 1080 (HD 1080)
DVI port	No
HDMI version	1.4
PC Audio out	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity	0
Compatible memory cards	MicroSD (TransFlash)
Noise level	- dB
Number of OSD languages	23
On Screen Display (OSD) languages	ARA, CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FIN, FRE, GRE, IND, ITA, JPN, KOR, POL, POR, RUS, SWE, THA, TUR, VIE
RMS rated power	6 W
Number of built-in speakers	2
Product type	Portable projector
Product color	Black, Silver
Market positioning	Portable
Power source	AC/Battery
AC input voltage	100 - 240 V
Power consumption (standby)	0.5 W
Power consumption (typical)	55 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 90 %
Cables included	AC, USB Type-C

Weight and Dimensions

Depth	126 mm
Width	151 mm
Height	40 mm
Weight	700 g