ViewSonic PJ503D-1 - Page 31

28
ViewSonic Corporation Confidential - Do Not Copy PJ503D-1
Figure 1-4 Figure 1-5
1.2 Front Glass Assembly.
i. Front Glass UV coated surface (marked) must face to Lamp. (Figure 1-6)
ii. F/G must be placed on datum surfaces well. (Figure 1-7)
iii. To make sure F/G Clip hooked well with Lamp Sleeve. (Figure 1-8)
Figure 1-6
Figure 1-7
Figure 1-8
F/G datum
screw
Assembly of Fin_Mesh
Face direction