Need help?Do you have a question about the ViewSonic PJD5122 and is the answer not in the manual?
General| Projection distance | 1.2 - 11.3 m |
|---|---|
| Vertical scan range | 48 - 120 Hz |
| Horizontal scan range | 31 - 100 kHz |
| Projection technology | DLP |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | ± 40 ° |
| Resolution | 1280 x 1024 pixels |
| Aspect ratio | 4:3, 16:9 |
| RS-232 ports | 1 |
| Weight (imperial) | 5.1 lbs |
| Dimensions (WxDxH) | 264 x 225 x 96.4 mm |
| Power requirements | 100 - 240 V, 50/60 Hz |
| Connectivity technology | Wired |
| Lamp power | 220 W |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 6000 h |
| Focus | Manual |
| Focal length range | - mm |
| Full HD | No |
| HD-Ready | Yes |
| Analog signal format system | SECAM |
| RMS rated power | 5 W |
| Audio (L/R) in | 0 |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| VGA (D-Sub) ports quantity | 3 |
| Component video (YPbPr/YCbCr) in | 2 |
| Cables included | VGA |
| Noise level | 32 dB |
| Certification | CB, RoHS, WEEE, UL/cUL, FCC-B, ICES-003, IRAM, NOM, PSB, C-tick, EK, CE, TUV/GS, GOST-R, SASO UKrSEPRO, CCC |
| Noise level (economic mode) | 26 dB |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 280 W |
| Operating altitude | 1.8 - 3048 m |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Product color | Black |
| Market positioning | Presentation |
Weight and Dimensions| Weight | 2300 g |
|---|
To Next Page
