ViewSonic PJD5122 - Page 31

Fig. 3-6 Fig. 3-7
4. AL, HSG ILL and HSG DMD Assembly:
4.1 Placed “AL” on the “HSG DMD”. The “raised surface” of “AL” shall toward “DMD
direction” (Fig. 4-1).
4.2 To assemble ”HSG ILL SUB Module” with “HSG DMD” and cover over on “AL” and the
then lock with screws(Fig. 4-2).
Fig. 4-1 Fig. 4-2
AL
DMD Direction
Screw
Fixed shafts& holes
Sponge
Screw
Confidential - Do Not Copy
PJD5122
ViewSonic Corporation
30