Mechanical Assembly Concern
1. Assemble Lower case
This module includes Lower-Case*1pcs,ADJ foot rear*1pcs，
Shielding Lower-Case*1pcs, Screw*3pcs, Nut*1pcs and fabric*1pcs，
2. Lower case and Adjust foot
This step needs assemble ADJ foot*1pcs, Push-button*1pcs and spring*1pcs.
3. Blower assembly and Blower module assemble with LC
This module includes BKT*1pcs, Clamp*1pcs, TH-SHD*1pcs, Nozzle-up*1pcs,
Nozzle-down*1pcs, Clip-mount*2pcs, Mount-seat*2pcs and screw*2pcs.
Confidential - Do Not Copy
PJD5122
ViewSonic Corporation
To Next Page
Loading...
