ViewSonic PJD5122 - Page 62

5
Disassemble the screw*5,
and take off the M/B
shielding.
screw
driver
6
(1)Take off the long wire
(one of twin fan wire),
then disassemble the twin
fan.
(2)Take off the twin fan
wire from M/B.
7
(1)Take off the C/W FPC
wire, blower fan wire,
C/W sensor wire, Ballast
5-Pin wire, speaker wire
from M/B.
(2)Take off right case
module.
screw
driver
8
Take off the M/B and M/B
SPG-RCA PBR
screw*5
twin
fan
take off this long wire first
blower fan wire
C/W FPC wire
C/W sensor wire
Ballast 5Pin wire
speaker wire
Main BD
Confidential - Do Not Copy
PJD5122
ViewSonic Corporation
61