2.9-2 Lamp Type Phoenix SHP E20.6 220W DC Lamp
3.0 Mechanical Specification
3.1 Dimensions 264 x 225 x 96.4 mm (L x W x H)
3.2 Weight <2300g
3.3 Security Slot Kensington compatible slot 200N break away force
3.5 Lens Cover Lens Cover
3.6 Feet
Fast adjustable foot in front, Adjustable foot and Fixed foot
in rear. foot Tilt:0-6 ,right/left: +2.2 /∘ ∘ -0.5
∘
4.0 Packaging Detail refer to Packing section
4.1 Outside Dimensions 380 x 191 x 324mm (L x W x H)
4.2 Weight <4000 g
4.3 Transportation
40 feet container 2232 sets, 20 feet container 1080sets
By air(A pallet ) 72 sets (B pallet ) 48 sets
5.0 Thermal Specification Mechanical component temperature at ambience 0~40° C
5.1 Surface held or
touched for short periods
Normal surface: @ 25° C
Metal < 60°C; Plastic<65°C
Bottom surface: @ 25° C
Metal < 60°C; Plastic<65°C
Metal Plastic
5.2 Surface which may be
touched
<70°C
<65°C, except around
ventilation*
5.3 Exhaust Air
<95°C around ventilation holes
6.0 Environmental
Operating
0~40°C, without condensation
6.1 Temperature
Storage -20~60°C, without condensation
Operating
10~90%RH, without condensation
6.2 Humidity
Storage 10~90%RH, without condensation
Typical
Normal mode: 32dBA @ 25°C
Eco mode: 26dBA @ 25°C
6.3 Audible Noise Level
Maximum
Normal mode: 34dBA @ 25°C
Eco mode: 28dBA @ 25°C
6.4 Altitude
Operating Altitude :
0~6000ft, 35°C~5°C
6000ft~10000ft, 25°C~5°C must be operational and
reliability decrease is acceptable*
* Note: not guarantee Power, Ballast, DMD and Lamp life.
Storage:
0~40000ft sea level (-20°C to 30°C)
Max altitude in 60°C : 0~6500ft
Max temperature in 10000ft : 53°C
Safety
CB, GS, UL, Argentina TUV, GOST-R,
Hygenic, Ukraine, PSB, SASO, eK, NOM,
CCC, CCC label
EMC FCC, C-Tick, CE
7.0 Regulatory
ESD Qisda ESD Specification
8.0 Reliability
8.1 MTBF
Demonstrated
40000 hours except DMD chip, Color
wheel, Lamp and Ballast
Confidential - Do Not Copy
PJD5122
ViewSonic Corporation
To Next Page
Loading...
Need help?
General
Weight and Dimensions
