20
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to uti-
lize this function:
1. Go to the Option > Presentation Timer menu and press on the projector or
Enter on the remote control to display the Presentation Timer page.
2. Highlight Timer Period and decide the timer period by pressing / .
Important
• If the timer is already on, the timer will restart whenever the Timer Period is reset.
3. Press to highlight Display Timer and choose if you want the timer to show up
on the screen by pressing / .
4. Press to highlight Timer Position and set the timer position by pressing / .
Top-Left Ш Bottom-Left Ш Top-Right Ш Bottom-Right
5. Press to highlight Timer Counting Direction and select your desired counting
direction by pressing / .
6. To activate the presentation timer, press to highlight Start Counting and press
on the projector or Enter on the remote control.
7. A confirmation message displays. Highlight Yes and press on the projector or
Enter on the remote control to confirm.
Selection Description
Always Displays the timer on screen throughout the presentation time.
1 Min/2 Min/3 Min Displays the timer on screen in the last 1/2/3 minute(s).
Never Hides the timer throughout the presentation time.
Selection Description
Count Up Increases from 0 to the preset time.
Count Down Decrease from the preset time to 0.
To Next Page
Loading...
