ViewSonic PLED-W200 - How to Operate

How to operate
• Using the keypad:
1. Press MENU to open the OSD menu.
2. When OSD is displayed, use / to select any feature in the main menu.
3. After selecting the desired main menu item, press ENTER to enter sub-menu for
feature setting.
4. Use / to select the desired item and press ENTER to confirm.
5. Adjust the settings with / , and then press ENTER.
6. If you want to select the menu option, press ENTER until the desired item is
displayed.
7. Press MENU to return to the main menu.
8. To exit OSD, press MENU again. The OSD menu will close and the projector will
automatically save the new settings.
• Using the remote control:
1. Press MENU to open the OSD menu.
2. When OSD is displayed, use / to select any feature in the main menu.
3. After selecting the desired main menu item, press to enter sub-menu for feature
setting.
4. Use / to select the desired item, adjust the settings or select the menu option
with / .
5. Press MENU to return to the main menu.
6. To exit OSD, press MENU again. The OSD menu will close and the projector will
automatically save the new settings.
24