27
The Projector has multilingual On-screen Display menus that allow you to
make image adjustments and change a variety of settings. The projector
will automatically detect the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel.
2. When OSD is displayed, use ▲▼ keys to select any item in the main menu.
While making a selection on a particular page, press “Enter” key to enter sub
menu.
3. Use ▲▼ keys to select the desired item in the sub menu and then press “Enter”
key to view further settings. Adjust the settings by ◄► key.
4. Select the next item to be adjusted in the sub menu and adjust as described
above.
5. Press “Enter” to conrm, and the screen will return to the main menu.
6. To exit, press “Menu” again. The OSD menu will close and the projector will
automatically save the new settings.
On-screen Display Menus
Main Menu
Setting
Sub Menu
To Next Page
Loading...
