ViewSonic Pro10100 - SETTING | Signal (Video)

45
SETTING | Signal (Video)
 “Signal” is only supported when the source is Video or S-video.
White Level
Allow user adjust White Level when inputting S-Video or Video signals.
Black Level
Allow user adjust Black Level when inputting S-Video or Video signals.
Saturation
Adjust a video image from black and white to fully saturated color.
`
Press the ◄ to decrease the amount of saturation in the image.
`
Press the ► to increase the amount of saturation in the image.
IRE
Adjust measurement of composite video signals.
 “IRE” is only supported on NTSC signal.
Projector ID
ID denition can be set up by menu (range 0-99) to indicate an individual projector.