ViewSonic Pro10100 - SETTING | Security

43
SETTING | Security
Security Timer
Use this function to set the how long (Month/Day/Hour) the projector can be used.
Once this time has elapsed you will be requested to enter your password again.
Change Password
`
First time:
1. Press “
” to set the password.
2. The password has to be 4 digits.
3. Use number button on the remote to enter your new password and then
press “
” key to conrm your password.
`
Change Password:
1. Press “
” to input old password.
2. Use number button to enter current password and then press “
” to
conrm.
3. Enter new password (4 digits in length) using the number buttons on the
remote, then press “
” to conrm.
4. Enter new password again and press “
” to conrm.
`
If the incorrect password is entered 3 times, the projector will automatically shut
down.
`
If you have forgotten your password, please contact your local ofce for support.
 Password default value is “1234” (rst time).
 Always keep the password in your les. If the password is forgotten or lost,
please contact your local authorized service center.