ViewSonic SC-T47 - Page 120

Conguring Client Settings
Conguring Service Access Settings
110
Display Protocol
Click the drop-down menu to select the display protocol. Three options are
available: Manual, Microsoft RDP, and PCoIP.
Option Description
Manual Manually select the desired display protocol.
Microsoft RDP Use Microsoft RDP as the display protocol.
PCoIP Use VMware PCoIP as the display protocol.
Common Settings
Item Description
Autostart When Startup
Select whether to open a VMware View or Horizon View session automatically or
not when Windows Embedded starts.
If Yes is selected, when you log in to the system, the VMware View or Horizon
View session will be opened automatically.
On Application Exit Select what to do when a VMware View or Horizon View session is ended.
Four options are available: Do Nothing, Restart Application, Reboot, and
Shutdown.
Option Description
Do Nothing Returns to the Windows Embedded desktop.
Restart Application Opens a View or Horizon View session again.
Reboot Restarts your thin client.
Shutdown Turns off your thin client.
Application Sub-tab
Window Settings
Item Description
Display
Click the drop-down menu to select the desired display size of a View desktop.
Five options are available: Full Screen, Multi Monitor, Large Window,
and Small Window.
Option Description
Full Screen Opens the selected View desktop in full screen.
Multi Monitor Opens the selected View desktop in multiple displays.
Large Window Opens the selected View desktop in a large window.
Small Window Opens the selected View desktop in a small window.