ViewSonic SC-T47 - Available Settings at a Glance

Conguring Client Settings
Conguring System Settings
30
4.2.2 Available Settings at a Glance
Tab Setting Icon Description Section Page
System
Password
Click to congure the access privileges of
ViewSonic Client Setup for client users.
Click to congure settings for remote assistance.
4.2.3
4.2.4
31
33
Firmware
Update
Click to update rmware locally with the help of
a remote management computer. This feature is
only applicable when the client is managed by
the ViewSonic Device Manager console.
4.2.5 34
Snapshot
Click to take a snapshot (system image) of the
client for mass deployment.
4.2.6
4.2.7
37
38
Appliance
Mode
Click to enable/disable the Appliance mode to
allow/disallow the automatic RDP / ICA / View
sessions. In Appliance mode, the client starts up
with the desired RDP / ICA / View session and
shuts down when the user logs out.
4.2.8 41
UWF
Click to congure UWF (Unied Write Filter)
settings. Enabling UWF option will redirect all
writes targeted for disk volumes to a RAM cache.
All system changes will only affect the session
where the changes are made.
4.2.9 45
NOTE
• ViewSonic Device Manager is a remote and mass client management console,
helping you remotely mange a large number of endpoint devices in a desktop
virtualization infrastructure. For more information about ViewSonic Device Manager,
please refer to the User’s Manual for ViewSonic Device Manager.