Setting Up Your SC-T47
Positioning Your SC-T47
11
2. Hold the stand of your SC-T47 in the other hand with the underside facing upward and the side marked with
a word FRONT facing left.
3. Align the stand with the lock slot side of your SC-T47, put four (4) hooks of the stand into the lock slots, and
then slide the stand left to lock it into place.
4. Secure the stand to your SC-T47 with one (1) screws supplied.
5. Place your SC-T47 uprightly with its xed stand on the desired position.
To Next Page
Loading...
