ViewSonic SC-T47 - Page 67

Conguring Client Settings
Conguring Service Access Settings
57
Connection Type: Remote Web Access
To quickly congure RDP connection settings for Remote Web Access connection type, please do the following:
NOTE
• Your SC-T47 supports only RD Web Access based on Windows Server 2012 R2;
Windows Server 2008 R2 based is not supported.
1. On ViewSonic Client Setup, click Applications > Remote Desktop.
2. The RDP Connection list appears in the Conguration area.
NOTE
• If you haven’t create any entry, the RDP Connection list will be empty.
3. Click Add on the top of the RDP Connection list to create a new entry of RDP connection.