ViewSonic SC-T47 - Page 82

Conguring Client Settings
Conguring Service Access Settings
72
RD Gateway Sub-tab
Connection Settings
Item Description
RD Gateway Server Settings
Click the drop-down menu to choose if a RD Gateway server is used,
automatically detected, or manually congured. Three options are available:
Automatically detect RD Gateway server settings, Use these RD Gateway
server settings, and Do not use an RD Gateway server.
Sever Name
Type the IP address / URL / FQDN of the RD Gateway server.
NOTE: Consult your network administrator for details.
Logon method
Click the drop-down menu to select the logon method. Three options
are available: Allow me to select later, Ask for password (NTLM), and
Smart card.
Option Description
Allow me to select later
Users can select a logon method while
connecting to the server.
Ask for password (NTLM)
Users will be prompted for a password while
connecting to the server.
Smart card
Users will be prompted for a smart card
while connecting to the server.
Bypass RD Gateway server for
local addresses
Check to prevent trafc to and from local network addresses from being routed
through the RD Gateway server and make a connection faster.
Logon Settings
Item Description
Use my RD Gateway credentials
for the remote computer
Check to use the same set of credentials for authenticating to both the RD
Gateway server and the remote computer.