10
Short Cuts Function from the button(s)
[1] Main Menu
[2] Input toggle
[▼] To immediately activate Blue Light Filter
[▲] To immediately activate View Mode
[▼] + [▲] 1. Recall Contrast or Brightness to default in its menu with-
out OSD message
2. While OSD menu o, recall CR/ BT to default without
OSD message.
[1] + [▲] OSD Lock / Unlock
[1] + [▼] Power Lock / Unlock
[2] + [▲] Logo Boot Up Screen On / O
When switch to Logo Boot Up Screen On
OSD Message (English only):
When switch to Logo Boot Up Screen O
OSD Message (English only):
*Default = Logo Boot Up Screen On
**It can’t be recalled by Memory Recall OSD function.
[2] + [▼] Toggle DDC/CI and DDC/2B (DDC/CI enable/disable) and
show following message for 3 seconds,
When switch to DDC/CI
When switch to DDC/2B
Default = DDC/CI
To Next Page
Loading...
