ViewSonic VP2786-4K - Backstage Lighting

5858
Backstage Lighng
With the Backstage Lighng funcon, the monitor can adjust the LED brightness to
the opmal sengs.
To congure the Backstage Lighng sengs:
1. Open the OSD Menu and select the Setup Menu menu. Then touch the l key to
enter the menu.
2. Move the Joy Key p or q to select Backstage Lighng. Then touch the l key to
enter its sub-menu.
3. Move the Joy Key p or q to select Level 1, Level 2, or Level 3 to enable the
funcon. Then touch the l key to conrm.