ViewSonic VP2786-4K - Auto Pivot Feature

5252
Auto Pivot
With the Auto Pivot funcon, the monitor can detect the image display and adjust
the image’s orientaon on the screen automacally when pivong the screen
vercally or horizontally.
NOTE: The Auto Pivot funcon uses DDC/CI to communicate with the monitor.
Before applying the Auto Pivot funcon, please make sure the DDC/CI
seng is set to On.
To enable the DDC/CI seng:
1. Open the OSD Menu and select the Setup Menu menu. Then press the l key to
enter the menu.
2. Move the Joy Key p or q to select DDC/CI. Then press the l key to enter its sub-
menu.
3. Move the Joy Key p or q to select On. Then press the l key to confirm.
Aer ensuring DDC/CI is On, proceed to set OSD Pivot to Auto:
1. Open the OSD Menu and select the Setup Menu menu. Then press the l key to
enter the menu.
2. Move the Joy Key p or q to select OSD Pivot. Then press the l key to enter its
sub-menu.
3. Move the Joy Key p or q to select Auto. Then press the l key to conrm.