ViewSonic VPC100 - Connecting PS;2 Devices; Connecting a PS;2 Keyboard; Connecting a PS;2 Mouse

ViewSonic VPC100
9
Installation
ConnectingPS/2
®
Devices
You can connect a keyboard and a mouse using the PS/2
®
ports on the rear of your
All-in-One PC. Before making any connections, ensure that the All-in-One PC is
turned off.
ConnectingaPS/2
®
Keyboard
Plug the keyboard’s PS/2
®
cable into the
purple PS/2
®
port of the All-in-One PC.
ConnectingaPS/2
®
Mouse
Plug the mouse’s PS/2
®
cable into the
green PS/2
®
port of the All-in-One PC.
NOTE
• The PS/2 devices should be connected
when the unit is powered off. This will allow
Windows to detect the devices once the
system is turned on.
• You can also connect a USB keyboard or
mouse using the USB ports.