ViewSonic VPC100 - Using the Optical Disc Drive; Inserting a Disc; Removing a Disc; Using the Keyboard

ViewSonic VPC100
14
Operating
UsingtheOpticalDiscDrive
InsertingaDisc
1. Press the eject button on the disc tray.
2. Pull the tray out.
3. With the disc label side up, place the disc on the center of the tray and snap
into place.
4. Gently push the tray back into the drive.
RemovingaDisc
1. Press the eject button on the disc tray.
2. Pull the tray out.
3. With your thumb on the center of the tray, pull the disc by its side with your
index nger to release.
WARNING
Do not remove the disc while the computer is still reading or playing it.
UsingtheKeyboard
A PS/2 keyboard is supplied with VPC100
computer.
The keyboard uses a standard key
arrangement with additional keys that
perform specic functions.
Hotkeys
: WWW home : Email : Web page back
: Web page forward : My favorites : WWW search
: Previous : Play / Pause : Next
: Volume Up : Volume Down : Mute
NOTE
Keyboard and mouse will be based on actual received units.