ViewSonic VPC100 - Security Menu

ViewSonic VPC100
25
BIOSSetupUtility
SecurityMenu
The Security menu displays the security settings and lets you set up and change the
supervisor or user password. Available options on this screen may vary depending on
the type of passwords set.
SupervisorPassword
The Supervisor can access and change setup utilities. He can also dene the
limitation of user access.
To set or change the supervisor password:
1. Select ChangeSupervisorPassword.
2. Type the password, then press [Enter]. The password can be an
alphanumeric character of up to 6 characters in length.
3. Re-type the password to conrm, then press [Enter].
Once the Supervisor password is set, you can change the UserAccessLevel. The
access level options are:
• FullAccess: Users can access and change all BIOS settings.
• Limited:Users are only allowed to change basic settings such as date and
time.
• NoAccess: Users cannot access the BIOS Setup Utility.
• ViewOnly:Users can view the BIOS Setup Utility but cannot change the
settings.