EasyManua.ls Logo

ViewSonic VPC100 - Page 39

ViewSonic VPC100
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ViewSonic VPC100
28
BIOSSetupUtility
InternalGraphicsModeSelect: Selects the amount of system memory used
by the internal graphics device.
DVMTModeSelect: Dynamic Video Memory Technology (DVMT) is a
concept used in integrated video wherein the optimum amount of memory is
dynamically allocated and de-allocated as needed to balance graphics and
system performance. Available modes are: Fixed, DVMT, and Combo.
DVMT/FIXEDMemory: Set the amount of memory allocated for DVMT.
HighPerformanceEventTimer: Select whether to enable or disable this
option.
SouthBridgeConfiguration
Your All-in-One PC uses Intel
®
ICH7M South Bridge Chipset. South Bridge
chipset is not directly connected to the CPU, instead the North Bridge chipset
ties it to the CPU. The South Bridge Chipset implements the slower performance
capabilities, such as the audio controller, PCI bus, and power management
among others.
To change the settings, select an item then press [Enter] to view the options.
AudioController: Select the audio controller among the list.
WirelessLanControl:Turn wireless LAN control on or off.
CameraControl:Turn camera control on or off.
OnboardLANBoot: Enable or disable Onboard LAN boot.
RestoreonACPowerLoss: Select the mode when system is restored after
an AC power loss. Options are: Power Off, Power On, and Last State.
PS2KB/MSWakeup: Enable or disable PS/2 keyboard and mouse wake up
controls.
ResumeOnRTCAlarm: Enable or disable RTC to generate wake events.
When enabled, the following items are required:
RTCAlarmDate(Days): Use [+] and [-] keys to adjust the date.
RTCAlarmTime:Press [Tab] to select a eld. Use [+] and [-] keys to
adjust the values.

Table of Contents

Related product manuals