ViewSonic VS18476 - On-Screen Display (OSD) Menu

2929
On-Screen Display (OSD) Menu
Use the On-Screen Display (OSD) Menu to adjust sengs.
NOTE: The OSD Menu is only available when there is an acve input source, e.g.
HDMI.
To open and operate the OSD Menu:
1. Press the MENU buon on the remote control.
2. Press q/p/t/u on the remote control to select menu items or adjust values.
3. Press OK to conrm your selecon.
4. Press the RETURN buon to go back to the previous menu level.
5. Press the MENU buon to exit the OSD Menu.