ViewSonic VSD242 - Back View Ports and Connectivity

10
E. Start-up and initial setting
Turn on the Power
1) Make sure the power cable and AC adapter are connected.
2) Long press the power switch until the status LED turns blue.
1) Select your language and tap
“Start”.
2) Select a Wi-Fi network, or tap
“Skip” to congure later.
3) Tap “Yes” to setup your
Google
TM
account or “No” to
congure later.
4) Conrm on screen
instructions and tap “ ”.
5) Select the appropriate time
zone to set the date and time,
and then tap “ ”.
6) Enter username and tap “
”.
7) Conrm onscreen instructions
and tap “ ”.
8) Tap “Next” to setup your
“Google Now™” or “skip” to
congure later.
9) Conrm onscreen
instructions and tap “OK”.
10) The initial settings are
completed.