VIKING ACCESS SYSTEMS
631 Wald Irvine, CA 92618
Phone 800.908.0884
Fax 949.753.1640
www.vikingaccess.com
STANDARD FEATURES
AND OPERATOR SPECIFICATIONS
INSTALLATION DATE: __________________________________
COMPANY / INSTALLER: ________________________________
CONTAC T: __________________________________________
SERIAL NUMBER(S): ____________________________________
ALL INSTALLATION, MAINTENANCE AND REPAIR WORK MUST BE
DOCUMENTED AND MADE AVAILABLE TO THE USER.
• UL325 and UL991 Compliant by Underwriter
Laboratories (UL) standards.
• Fail-Safe option sets the gate to
automatically transfer to a fail-safe mode
in the event of a power failure, allowing the
gate to be pushed open without the use of
special knowledge of the equipment
• Fail- Secure option sets the gate to
electronically lock in the event of a power
failure, allowing no manual movement
without the use of the manual release
• Elegant design, appealing to any
architectural project
• Plated and powder coated steel chassis
• Adjustable travel speed
• Up to 30’ maximum gate opening
• 100% duty cycle
• 100 cycles of operation on backup battery
• Intelligent speed control with smooth start
and stop, self-adjust system
• On-Board LCD Display provides diagnostics,
operator status, settings and real-time volt
and amp readings
• Intelligent obstruction detection with
adjustable sensitivity
• Built-in climate control for cold weather
applications
• Built-in protection against lightning strikes
or similar electrical surges
• Inherent overload protection in the regulated
power supply for external accessories with
multiple devices of protection
• Modular connectors for easy access control
installation
• Solar panel and low voltage wiring
compatibility
• LED indicators display gate and operator
status for easy troubleshooting
To Previous Page
Loading...
