VIKING TECHNICAL SUPPORT 1.800.908.0884 I-770 • Rev A4 • FEBRUARY 2023
1
TABLE OF CONTENTS:
IMPORTANT SAFETY INFORMATION 2-9
Important Safety Instructions 2
Important Installation Instructions 2-3
Maintenance 4
General Safety Precautions 4-5
UL325 Gate Operator Classifications 5
Monitored Entrapment Protection Requirements 6
Monitored Entrapment Protection Installation 7
Manual Release 7
Audible Alarm Reset Installation 8
Warning Placard Installation 9
SPECIFICATIONS 10
CONTROL BOARD REFERENCES
11
GATE OPERATOR INSTALLATION
12-16
Plans of Installation 12-13
Installing the Gate Operator 14-15
Limits Setup 16
ECU BOX INSTALLATION 17
ELECTRICAL INSTALLATION 18-22
Low Voltage Supply (Standard) 18
Solar Voltage Supply Option 18
High Voltage Supply Option 19
Motor Cable 20-21
Monitored UL Sensor Connections 22
LIMITS INDICATIONS 23
CONTROL BOARD SETUP 24-26
Initial Settings 24-25
Obstruction Detection Sensor (ODS) 26
ACCESSORY CONNECTIONS 28-34
Access Control Connections 28-29
Radio Receiver 30
Photocell 31
Viking Loop Rack 32
Guidelines for Loop Installations 33
Magnetic Lock, Lock Solenoid 34
TROUBLESHOOTING 36-38
LED References 36-37
Solutions 38
PARTS DIAGRAM/PARTS LIST - OPERATOR 40
PARTS DIAGRAM/PARTS LIST - CONTROLLER 41
LIMITED WARRANTY 42-43
VIKING ACCESSORIES 44
To Next Page
Loading...
