VIKING TECHNICAL SUPPORT 1.800.908.0884
44
VIKING ACCESSORIES
VIKING 24V SOLAR KIT The components included in this
package are intended to provide sufficient power for general applications.
Part# VA-SOCHP
This Kit includes the following components:
(2) 12V 40W Solar Panels Part# VA-SO40W (wired in series = 24V 80W)
(2) 12V 35Ah batteries Part# DUBA35 (wired in series = 24V 35Ah)
(1) Solar Charger Part# SOCHR10
(1) Solar Power Harness Part# SOHAR
VIKING SOLAR BRACKET SET Conveniently secures two
18Ah batteries and Viking 24V Solar Charger (or Viking Loop Rack) to the
ECU Enclosure. Part# VA-ECUBB12
This Kit includes the following components:
(2) Brackets for 18Ah batteries
(1) Solar Accessory Plate
! NOTE: The number of cycles achieved from this kit are dependent upon
the following and may require increased panel and battery capacities:
•
Power consumption of all accessories being used
•
Average solar radiation of geographic location
VIKING AC SURGE PRO Adds another layer of protection to
the high voltage power supply of your gate operator. Connecting the AC
Surge Pro in parallel to the EMI Board, provides a dual layer of protection
from surges up to 20,000 Volts / 10,000 Amps. Part# VA-SURGEPROAC
VIKING MONITOR Off-site access to operator diagnostics.
With the Viking Monitor App, this tool allows you to monitor and label
multiple operators by site and location for quick reference. Provides error
notifications, operator status, settings and diagnostic information.
Part# VA-MONITOR
***Q-7 & ECU Operators require (1) Antenna Extension Cable (part# VA-RPSMA)***
To Next Page
Loading...
