23
Functions and InfoDisplay
Mending and taper satin stitches
These stitches can only be selected
in
NORM mode. They can not be
programmed or combined. Each stitch
has a memory to store the number of
stitches length, or width changes.
1 Sew until the stitch has reached the
desired length.
2 Touch REVERSE. The machine now
completes the stitch.
3 When you have the result you wish,
touch STOP.
4 The stitch will now repeat in
succession and the machine will
stop automatically when the stitch is
completed
To Next Page
Loading...
