48
Care of your Interlude
Changing the Light Bulb
Only use light bulbs of a type as
indicated on the front of the machine
(12V, 5W). They are available at your
authorized Husqvarna Viking dealer.
!
Turn off the main switch.
1 Place the light bulb remover with
the deep hole, marked OUT,
around the bulb.
Do not turn the bulb, just pull it out
to remove it.
2 When inserting a new light bulb
place the remover with the shallow
hole, marked IN, around the new
bulb. Insert the new bulb by
pushing it up.
To Next Page
Loading...
