35
Sewing
Darning and Mending
Darning a small hole or a tear before
it becomes larger can save a garment.
Choose a fi ne thread in a color as close
to your garment as possible.
Fabric: Woven medium, poke a small
hole to darn.
445
15
435
11
80
Sew:
• Place the fabric in position under the
presser foot.
• Lower the presser foot and step on
the foot control. Start sewing above
the hole and sew down over it.
• Once over the hole, touch
.
Continue sewing. The machine sews
back and forth across the hole twelve
times and then stops.
• To repeat the stitch with the same
size, touch
. Reposition your
fabric, then step on the foot control
to sew again. The stitch will now
repeat the same size darning square
in succession and the machine will
stop automatically when the stitch is
completed.
To Next Page
Loading...
