Operation
©2012 Viking Preferred Service 13
Height Adjustment
Removal of the kickplate allows access
to rollers and stabilizing legs for height
adjustment.
1. Remove lower kickplate screws using a
Phillips screwdriver.
2. Remove upper kickplate screws using a
Phillips screwdriver. Remove kickplate
assembly.
3. Using a 5/16” head wrench, turn the front
(F) adjustment screws to raise or lower
the front of the freezer.
Note: DO NOT use an electric device.
Overtightening can cause damage.
4. Using a 5/16” head wrench, turn the rear
(R) adjustment screws to raise or lower
the rear of the refrigerator.
5. Reinstall kickplate.
Note: DO NOT use an electric device.
Overtightening can cause damage.
To Next Page
