9
Fig. 8: Manual set point setting
The selection is confirmed by touching .
The and icons in the lower right corner indicate whether the system is operating in heating or
air-conditioning mode respectively (icon illuminated = system on).
6.3 Away
This mode is useful to achieve energy savings quickly and effectively whenever the user leaves the reg-
ulated room.
In "Away" mode the system makes the adjustment according to the "away temperature" setpoint
(see para. 7.4.2) which is more cost-effective than the manual setpoint and different to switching off the
system completely.
The Away mode can only be activated in manual mode by touching .
The display will show the "away temperature" setpoint for approximately 2 seconds:
Fig. 9: Input in away mode showing the away temperature
To Next Page
Loading...
