13
6.7 Remote activation
This mode is typically used in applications where you want to remotely enable or disable temperature
control of a room and limit the functions that can be performed by the user.
For example, this is a typical mode in hotel room management.
This mode comes into operation when the multi-function input is activated (see par. 4.1) only if it
has been suitably configured by the installer (see par. 7.7).
In "remote activation" mode, the device sets the temperature to a value equal to Tcomfort (see para. 7.4).
In this condition the display and its buttons have limited functions; access to the settings menu is disabled
and you can only change the temperature setpoint within a limited range (see par. 7.4.5).
The "Remote activation" mode is identified by the icon located above the temperature indicator.
The and buttons let the user change the temperature in the range .
Fig. 15: Input in Remote manual mode
On disabling the multi-function input, the thermostat switches to Antifreeze mode (system on heating) or
OFF (system on air-conditioning) and the user can again manage the device completely.
To Next Page
Loading...
Need help?
General
