19
the load on the system; in general, the rule is that Tb can be that much higher (and therefore put fewer
demands on the system), the slower the system or the larger the environment to regulate.
Tap to confirm your choice.
7.9 Colour setting
This menu is used to select the background colour of the display.
In addition to the four default colours, you can set a colour to your choice selected from the full range of
colours, or set "ECO" mode in which the display colour is a clue to the expected level of consumption
in the building.
Via and you can select:
• : white default colour
• : colour matching the Plana series
• : colour matching the Eikon series
• : colour matching the Arkè series
• (custom colour): takes you to another menu and via and you set a custom
colour; while the numbers scroll, the display shows the corresponding colour
in real time.
• : ECO mode allows displaying a colour that, depending on the set temperature, is associated
with the expected level of energy consumption. Specifically:
green yellow red
optimum consumption excessive consumption
ECO mode therefore does not display the colour as a function of the temperature measured at that
time but only in relation to the set point.
Lastly, tap to confirm your choice.
To Next Page
Loading...
Need help?
General
