Vimar BY-ME User Guide

50
Audio
4.5 Details menu of the sound source connected to the RCA port and controlled by the respec-
tive infrared remote control.
From the zone menu, it is possible to access the menu of commands associated with the IR interface.
Each command can be associated with a sequence of 1, 2, 3 or 4 actions and this corresponds to consecutively
pressing up to 4 buttons on the remote control of the controlled device.
More precisely, the association of the commands with the 4 menu buttons is the following:
Important:
All the commands are cyclic; for example:
• Touching
Dockingstation 1
I-Pod
controllato
localmente
1 time activates the Pause control; touching it again activates Resume; touching the icon yet
again activates Pause and so on.
• Touching the
Interfaccia IR
button 1 time activates Sel. Source 1; touching the icon again activates Sel. Source 2;
touching the icon yet again activates Sel. Source 3; touching the icon again activates Sel. Source 1 and so on.
IR Interface
• to return to the list of artists.
• to return to the list of albums.
• to return to the Playlist.
• to return to the previous menu.
4.4.1 Operation
The database of the iPod/iPhone can be browsed by Playlist or Artist and navigation is permissible also while
playing a song.
During navigation, the type of category currently selected is highlighted by the relevant identifying image.
After selecting the desired type of category, it is possible to send it to playback with the
Dockingstation 1
Queen
Best of Queen...
We will rock
icon thus returning
automatically to the Playback screen.
With
Dockingstation 1
Queen
Best of Queen...
We will rock
you go back to the Playback menu.
COMMAND
Play
COMMANDS
Pause
Resume
COMMANDS
Sel. Source 1
Sel. Source 2
Sel. Source 3
COMMAND
Skip +
Fig. 14

Vimar BY-ME Specifications

General

Category	Home Automation
Protection Degree	IP20
Wiring	2-wire bus
Functions	Lighting
Relative Humidity	5 - 85% (non-condensing)