3939
Settings
2. SETTINGS MENU.
The Settings menu is used to set the control panel's clock, select the current language, set the colour of the
display and the tones of the buttons, the preferred applications to display on the start-up screen, the time-out for
activating the screen saver, displaying the temperature measured by the probe (where applicable) and the unit of
measurement of the temperature.
2.1 Setting the clock.
Used to set the date and time.
Main Menu
Setup
Settings
Date and Time
Select Master or Slave
• Select Master
Automatic EU or Daylight Saving or Solar and by to view and select the values,
you go to set up respectively:
- Automatic EU; once entered manually current date and time, the control panel will automatically switch from
daylight saving time (last Sunday in March at 2:00) and from daylight savings time (last Sunday in October at 2:00).
- Daylight Saving; to be used in non-European countries, this option allows you to enable daylight saving time
manually inserting it.
- Solar; to be used in non-European countries, this option allows you to enable solar time manually inserting it.
• If you select Slave the date and time cannot be entered with the control panel (the display will show the pop-up)
but will be set automatically by the web server (where applicable).
Confirm with Save; in both cases, the control panel will confirm the operation has been completed.
2.2 Setting the language.
Used to set the national language in which the menus are displayed. The available languages are Italian, English,
German, Spanish, French and Greek.
Note: If the user does not have the necessary privileges you will be asked to change user.
Main Menu
Setup
Settings
Language
The active language is signalled by the symbol ; perform to scroll through the list of available languages
and touch the one you want. Confirm with Save; the control panel will display the confirmation of the operation.
2.3 Display and Tones.
Used to set the parameters of contrast and backlighting of the display, the tones of the icons for using and pro-
gramming the control panel and performing the touch screen calibration function.
Main Menu
Setup
Settings
Display and Tones
It is then possible, by touching the desired one, to set the following parameters:
- Contrast of the Display
Use to select the desired value
Save
- Backlighting
Use to select the desired value
Save
- Keyboard tones
Use to select the desired value
Save
- Touch calibration (a pop-up will be displayed to illustrate the procedure to follow)
Next
To Next Page
Loading...
Need help?
General
