56
Events
7. EVENTS.
The Events menu enables implementing some advanced functions using the home automation system.
For example, it is possible to switch on the garden lights for a certain length of time, switch off all the lights in the
house on activating the alarm system when going out, activate a scenario when coming back in you deactivate
it, etc.
In addition it is possible to add time conditions to activate the events only in the desired time intervals and/or on
the occurrence of certain situations.
The structure of the event is composed of at most 2 inputs and 2 outputs that can be on/off functions (groups),
scenarios and conditions of the anti-theft system (for example on/off/alarm status).
In addition it is also possible to include a condition among the inputs and a condition that allows making the events
more flexible (for example it switches on garden watering at a set time only IF it is not raining, or it lowers the roller
shutters at a set time only IF it is dark).
The Events menu enables:
- stopping and restarting the selected event manually;
- controlling the users (outputs) associated with the event even if it is not active;
- changing the event on and/or off times;
- viewing the structure of the event.
7.1 Stopping or restarting an event.
The initial screen of the Events menu, which is accessed via the Main Menu, displays one of the created pro-
grams. For example
Touching
displays the information on the selected program (Inputs IN, Outputs OUT, Timing, Current Status, etc.).
Touching
displays the options for managing the selected program:
- Stop Program to stop the currently active selected program.
- Activate Program Outputs to activate all the outputs associated with the selected program.
- Deactivate Program Outputs to deactivate all the outputs associated with the selected program.
When the event is stopped, the wording Stop Program is automatically replaced by Restart Program; therefore,
when you want to activate an event manually, simply repeat the procedure that has just been illustrated and touch
Restart Program.
The control panel will always display a message confirming the operation carried out.
enabled
Setup
Menu
Events
Programme 01
Garden Sprinkler
Fig. 18
To Next Page
Loading...
Need help?
General
