Vimar BY-ME User Guide

52
Managing RGB lamps
Set the parameters of Fading Show in order to obtain the play of light you want:
• Fading Show colors: select the colors to be reproduced (Red, Orange, Yellow, Green, etc.) up to a maximum
of 6;
• Tansition [min:s]: set the time that elapses between the passage of one color to the next;
• Persistance [min:s]: set the time in which each color is played.
Finally confirm the settings by touching Save.
Fig. 17
Duration of transition
Duration
persistence
Duration of transition

Vimar BY-ME Specifications

General

Category	Home Automation
Protection Degree	IP20
Wiring	2-wire bus
Functions	Lighting
Relative Humidity	5 - 85% (non-condensing)