Refer to the above wiring diagram, insert all wires vertically from
the open socket into the proper terminal. Ensure each wire is
inserted into the matching terminal (refer to the photo taken
previously if needed). Pull wires gently to ensure wires are
securely fastened.
When all wires are connected well, place excess part of the wires
back to the wall.
First aim the two clips in upper part of the thermostat to the top
of the wall plate, then gently push and fit the wiring pole to the
terminals on the wall plate.
Connect the wires to the new wall plate
Step 8
Install the thermostat to the wall plate
Step 9
RC RH G W/E Y C Y2 O/B
/W2
push
1
2
clips
push
Firmly press
forward to secure it
into position.
14
To Next Page
Loading...
