The HVAC system settings depends on the type of system you use, common options are shown below:
Mode Setup
Turn on cooling when the current temperature
rises above the setpoint.
Cool
Turn on heating when the current temperature
drops below the setpoint.
Heat
Activate the heating or cooling system as
required to keep your home within the
configured range of setpoint.
Auto
Use ONLY the Emergency Heat or backup
heat source to maintain the heat setpoint. This
option only appears if Emergency heat is
configured in the Equipment menu.
EM. Heat
Turn the system off. When the system is off,
only the current temperature will be
displayed on the Home screen.
Off
26
To Next Page
Loading...
